Electric heating is extremely safe for users

Close the water inlet and outlet valves before the electric heating furnace stops heating: After the radiator is used in the heating season, measures such as full water maintenance during the non-heating period should be taken. Generally, the new radiator requires the water inlet and outlet valves to be closed before the heating is stopped, so as to ensure heat dissipation. the service life of the device to prevent leakage events.

When cleaning the surface of the radiator, do not use organic solvents, use mild detergents such as soapy water. The water in the heating is softened water with anti-corrosion treatment, and chemical reagents are added, so the cost is high. The electric heating furnace controller is a fully automatic electric heating furnace boiler controller controlled by a microcontroller. Including joint control of return water temperature and room temperature, joint control of outlet water temperature and room temperature, independent return water temperature control, independent outlet temperature control and other control methods, it has small size, strong anti-interference ability, high reliability, and its rich interface and A variety of control methods can be applied to the control requirements of various types of electric heating furnace boilers.

Electric heating stoves are extremely safe for users, will not cause safety problems, and have good leakage protection measures. Therefore, the user will not be exposed to the magnetic field strength caused by the electric heating furnace equipment, which is far less than the relevant safety standards. The installation equipment of the electric heating stove is completely installed inside the building equipment, and people will not touch the electric heating stove, and will not cause any safety problems.

Electric heating stove cleaning: Electric heating stoves without a blowdown valve must be heated. Winter is the peak season for electric heaters, but not many families clean it regularly.

The hazards of not cleaning the electric heating stove: After the electric heating stove is used for a certain period of time, the scale inside should be cleaned, and the formation of scale is affected by temperature. Generally, machines with a water temperature of not more than 70 will rarely get scale. There are many ways to clean the scale. The simple is to use a solar descaling agent, add it to it and release the water after a period of time. The scale can be cleaned very cleanly, which can make the heating system of the electric heater look brand new.